榮笙瓦楞紙箱機械有限公司

產品

Slotting mechanism

Call

  1. Separate adjustment to the position, depth, horizontal width of the feeding, slot, offering swift yet precise operation.
  2. Each of the five knife holder can travel laterally to the left or the right. Can order the front knives and rear knives on different shafts or on the same shafts.   
  3. All spindles in chromium electro-plating with superb polishing that prevents loosening the cutter
    plates, or tilting during the printing process, and extends the operating cycle of all cutters and cutter plates.
  4. Optional binding plate or die-cut unit, billed separately.
  5. Corner cutter in a dual crimping design that offers easy operation for sharp, clean cut with minimal noise. Three level paper board and five level paper do not need adjust the gap.
  6. Edging cutter in scaled, serrated configuration in selected SKD steel provides neat edging
       without scuffing through cutters of extended operating life.
  7. The two blades (front and the rear) have differnt axles. there is no limit of the height in the
       cardboard boxes.